Truck Demonstrator List

Mercedes-Benz Trucks

Econic 1830L Skip Loader

Key Features:
- 3450mm wheelbase
- Powershift 3 Gearbox (G211-12)
- Factory fit Blind Spot camera system
- Holding brake and automated frame lowering
  at front axle
- Driver's suspension seat, comfort
- ABA3 as standard
Bodywork:
- Hyvalift NG2012 XL Skip body c/w Radio Remote 
  control
- Hyva Easy Sheet
- Additional features & non-factory equipment
- Lift capacity: Ground level: 12t arms in; 8t arms out 800 mm below ground: 8.2t arms in; 5.4t arms out

Econic 2630L Refuse Body

Key Features:
- 3900mm wheelbase
- Automated frame lowering at front axle
- Sideguard Assist
- Blind Spot camera system
- Preinstallation Reversing Assist (in association with      WABCO TailGuard)
- ABA3 as standard
- Fleetboard
Bodywork:
- CP Davidson Titan XLS – 21m3 refuse
  collection body.
- Titan 2406 Low Level Split Automatic Bin Lift
- Vision Technique Overview – 4 Camera System
- Eco Delta Valve – Binlift operates at tickover which gives a 10–15% saving on fuel and is extremely quiet.            

Econic 3235L 8x4 Tipper Grab

Key Features:
- Active Brake Assist B
- Factory fit Blind Spot camera system
- Allison 3200 P Automatic Transmission
- Transmission mounted high-speed PTO Bodywork:
- Thompsons tipping
Bodywork:
- Additional features & non factory equipment                                                                                                            

Atego 818 Curtainside 

Key Features:
- 4x2 with rear steel suspension
- 4220mm Wheelbase
- OM934 5.1L 177hp Engine
- 7.49t GVM (3.8t Front Axle, 5.7t Rear Axle)
- S Cab ClassicSpace (with tunnel)
- Air conditioning
- Safety equipment including Stability Control Assist, Lane Keeping Assist & Drivers Airbag
- LED light package
Bodywork:
- Cartwright Curtain-side with rear barn doors.
- Dhollandia 1 tonne Tuckaway tail-lift
- Body dimensions: Length 6100mm, Width 2440mm, Side Aperture Height 2300mm
Rear Aperture Height 2300mm                          

Atego 1223L Curtainside

Key Features:
- 4x2 with rear air suspension
- 4760mm Wheelbase
- 11.99t GVM (4.9t Front Axle, 8.1t Rear Axle)
- OM934 5.1L 231hp Engine
- High Performance Engine Brake
- S Cab ClassicSpace Extended (with tunnel)
- Air conditioning
- Safety equipment inc. Active Brake Assist, Stability Control Assist & Lane Keeping Assist
- LED light package
Bodywork:
- Cartwright Curtain-side with rear barn doors.
- Dhollandia 1 tonne Tuckaway tail-lift
- Body dimensions: Length 6600mm, Width 2440mm, Side Aperture Height 2300mm
Rear Aperture Height 2300mm

Antos 1824L Curtainside

Key Features:
- 4x2 with rear air suspension
- 8t front axle
- OM936 7.7L 238hp Engine
- M Cab ClassicSpace (2.3 320 tunnel)
- Safety equipment including:
  Active Brake Assist 4, Drivers Airbag, Proximity
  Control Assist
Bodywork:
- Newlands Curtain-side with rear barn doors
- Lift up lashing points at 1000mm in V groove
  side raves
- PIR Interior body lights
- Dhollandia 1.5 tonne Tuckaway tail-lift
- Body dimensions: Length 8600mm, Width 2520mm , Side Aperture Height 2550mm, Rear Aperture Height 2440mm

Arocs 3240K Charlton Tipper - At Intercounty

Key Features:
- 8x4 chassis prepared for tipper body without subframe (C5X)
- M Cab ClassicSpace (2.3 320 tunnel)
- Comfort Cab Suspension
- Tipper Control, in cab
- High Performance Engine Brake
- Gearbox PTO, MB 131-2c
Bodywork:
- Boweld Taperlite HD – 15 Cubic Metre
- Edbro CX15 Front End Tipping Gear
- ‘Vertilock’ Auto-locking Tailgate
- PM1155 On-board Weighing System

Econic 1835LS Tractor Unit

Key Features:
- Jost JSK 37C Fixed 5th wheel  (+800mm lead)              -1250mm coupling height
- Active Brake Assist
- Blind Spot camera system
- Allison 3200 PR automatic transmission with 5-stage         retarder
- Driver's suspension seat, comfort. (Single passenger seat)
- 36t GCW                                 
Bodywork:
- Anderson lead to rear of cab
- SB Components Catwalk and folding step
- Step protect fitted to nearside

Actros 2448LS Tractor – Wet Kit

Key Features:
- 6x2/2 17.5” Midlift
- OM471 12.8L 476hp Engine
- Predictive Powertrain Control
- StreamSpace Cab (2.5 Flat Floor)
- StyleLine Interior
- Fridge under bed
- Air deflector
- Fontaine Sliding fifth wheel
- Safety Pack with ABA3, Proximity Control Assist & Drivers Airbag
Bodywork:
- Hydraulic pumping equipment fitted for operation with Tipping Trailers, Walking Floor
& Ejector Trailers

Actros 2543LS Tractor

Key Features:
- 6x2/2 Midlift
- OM470 10.7L 428hp Engine
- Predictive Powertrain Control
- StreamSpace 2.3 Cab (320 tunnel)
- Air deflector
- Fontaine Sliding fifth wheel
- Safety Pack with ABA4, Proximity Control Assist & Drivers Airbag
Bodywork:
- Full SB Components catwalk
- Adverc Guardian Tail-lift system inc. cable

Actros 2545LS Tractor

Key Features:
- 6x2/2 Midlift
- OM471 12.8L 449hp Engine
- Predictive Powertrain Control
- StreamSpace Cab (2.5 Flat Floor)
- Jost Sliding fifth wheel
- Safety Pack with ABA4, Proximity Control Assist & Drivers Airbag
Bodywork:
- SB Components chassis in-fill
- Adverc Guardian Tail-lift system inc. cable

Actros 2545LS Tractor – Biodiesel

Key Features:
- 6x2/2 Midlift
- OM471 12.8L 449hp Engine with Preparation for Biodiesel Operation
(FAME – EN14214)
- Predictive Powertrain Control
- StreamSpace Cab (2.5 Flat Floor)
- Fontaine Sliding fifth wheel
- Safety Pack with ABA4, Proximity Control Assist & Drivers Airbag
Bodywork:
- SB Components chassis in-fill
- Adverc Guardian Tail-lift system inc. cable

Actros 2546LS Tractor

Key Features:
- 6x2/2 Midlift
- OM470 10.7L 455hp Engine
- Predicitive Powertrain Control
- StreamSpace 2.3 Cab (170 tunnel)
- StyleLine Interior
- Air deflector >4m
- Fontaine Sliding fifth wheel
- Safety Pack with ABA3, Proximity Control Assist & Drivers Airbag
Bodywork:
- Bodywork
- Additional features & non-factory equipment

Actros 2546LS Tractor

Key Features:
- 6x2/2 Midlift
- OM470 10.7L 455hp Engine
- Predictive Powertrain Control
- StreamSpace 2.3 Cab (170 tunnel)
- Air deflector >4m
- Fontaine Sliding fifth wheel
- Safety Pack with ABA4, Proximity Control Assist & Drivers Airbag
Bodywork:
- Full SB Components catwalk
- Adverc Guardian Tail-lift system inc. cable

Actros 2548LS Tractor- At Intercounty

Key Features:
- 6x2/2 Midlift
- OM471 12.8L 476hp Engine
- Predictive Powertrain Control
- BigSpace Cab (2.5 Flat Floor)
- StyleLine Interior
- Fridge under bed
- Air deflector
- Jost Sliding fifth wheel
- Safety Pack with Active Brake Assist 4, Proximity Control Assist & Drivers Airbag
Bodywork:
- Full SB Components catwalk
- Adverc Guardian Tail-lift system inc. cable

Actros 2553LS Tractor

Key Features:
- 6x2/2 Midlift
- OM471 12.8L 530hp Engine
- Predictive Powertrain Control
- GigaSpace Cab (2.5 Flat Floor)
- StyleLine Interior
- Dura-Bright Alloy Wheels
- Fridge under bed
- Air deflector >4m
- Fontaine Sliding fifth wheel
- Safety Pack with ABA4, Proximity Control Assist & Drivers Airbag
Bodywork:
- Full SB Components catwalk
- Adverc Guardian Tail-lift system inc. cable

Actros 2563LS Tractor – Actros1 #0

Key Features:
- 6x2/2 Midlift
- 9t front axle
- Dura-Bright Alloy Wheels
- OM473 15.6L 625hp Engine
- 68 tonnes Gross Combination Weight
- Predictive Powertrain Control
- GigaSpace Cab (2.5 Flat Floor)
- StyleLine Interior
- Fridge under bed
- Fontaine Sliding fifth wheel
- Safety Pack with ABA4, Proximity Control Assist & Drivers Airbag
Bodywork:
- Hatcher Components rear wall lockers
- SB Components catwalk and side-skirts
- Microwave in rear locker

Actros 2553LS Tractor

Key Features:
- 6x2/2 Midlift
- OM471 12.8L 530hp Engine
- Predictive Powertrain Control
- GigaSpace Cab (2.5 Flat Floor)
- StyleLine Interior
- Fridge under bed
- Air deflector >4M
- Fontaine Sliding fifth wheel
- Safety Pack with ABA3, Proximity Control Assist & Drivers Airbag
Bodywork:
- Adverc Guardian Tail-lift system inc. cable.

Actros 2548LS Tractor

Key Features:
- 6x2/2 Midlift
- OM471 12.8L 476hp Engine
- Predictive Powertrain Control
- BigSpace Cab (2.5 Flat Floor)
- StyleLine Interior
- Fridge under bed
- Air deflector
- Jost Sliding fifth wheel
- Safety Pack with Active Brake Assist 4, Proximity Control Assist & Drivers Airbag
Bodywork:
- Full SB Components catwalk
- Adverc Guardian Tail-lift system inc. cable.

Actros 2532L Curtainside 6x2

Key Features:
- 6x2 with rear steer & lift axle
- 8t front axle
- L Cab StreamSpace (2.3 320 tunnel)
- Safety Pack including: Active Brake Assist 4, Drivers Airbag, Proximity Control Assist & Roll Control Assist
Bodywork:
- Bevans Curtain-side with rear barn doors
- ‘Drop-link’ lashing points at 1000mm centres
- PIR Interior body lights
- Dhollandia 1.5 tonne Tuckaway tail-lift
Body dimensions:
- Length 9560mm, Width 2550mm, Side Aperture Height 2440mm, Rear Aperture Height 2440mm

Atego 1223L Curtainside 4X2

Key Features:
- 4x2 with rear air suspension
- 4760mm Wheelbase
- 11.99t GVM (4.9t Front Axle, 8.1t Rear Axle)
- OM934 5.1L 231hp Engine
- High Performance Engine Brake
- S Cab ClassicSpace Extended (with tunnel)
- Air conditioning
- Safety equipment inc. Active Brake Assist, Stability Control Assist & Lane Keeping Assist
- LED light package
- Cartwright Curtain-side with rear barn doors
- Dhollandia 1 tonne Tuckaway tail-lift
Body dimensions:
- Length 6600mm, Width 2440mm, Side Aperture Height 2300mm Rear Aperture Height 2300mm

UGE U5023 4x4 3850 Dropside with Crane

Equipment:
G48 | Automatic shift (EAS)
A30 | Central tyre inflation system (CTIS)
N16 | High speed gearbox PTO avec 4 hole connection
N05 | Live engine PTO to rear (with flange)
G28 | Preparation for retrofitting working gear range
Q32 | Rear cross member for rised trailer load

Unimog: UGE U530 4x4 3900 Tipper

Equipment:
G20 | Additional gearbox with working gear range
G48 | Automatic shift (EAS)
A30 | Central tyre inflation system (CTIS)
N05 | Live engine PTO to rear (with flange)
N08 | Live PTO incl. PTO front
P60 | Platform subframe, low
Q33 | Rear cross member lowered for 2 trailer    couplings
H43 | Tip cylinder for platform
G50 | Transmission oil cooler
C50 | VarioPilot (dual mode - left/right hand steering

Unimog: U218 4x4 2800

Equipment:
N05 | Live engine PTO to rear (with flange)
N08 | Live PTO incl. PTO front
P60 | Platform subframe, low
G28 | Preparation for retrofitting working gear range
H43 | Tip cylinder for platform
C50 | VarioPilot (dual mode - left/right hand steering

Econic: 3235L 8x4 Tipper Grab

Key Features:
- Active Brake Assist 3
- Factory fit Blind Spot camera system
- Allison 3200 P Automatic Transmission
- Transmission mounted high-speed PTO
- Thompsons tipping Bodywork
- Additional features & non-factory equipment

FUSO Canter Trucks 

Canter 7C15 HEV Box

Key Features:
- 3850mm wheelbase
- Diesel/Electric Hybrid system with kinetic energy recovery system
- Hybrid display with state of charge indicator and energy-flow display
- Engine Start/Stop System
- 24v voltage transfer for body builder applications
Bodywork:
- Aero box body
- Aerodynamic cab top deflector and
  side collars
- Tuckaway taillift

Canter 7C15 HEV Box

Key Features:
- 3850mm wheelbase
- Diesel/Electric Hybrid system with kinetic energy recovery system
- Hybrid display with state of charge indicator and energy-flow display
- Engine Start/Stop System
- 24v voltage transfer for body builder       applications
Bodywork:
- Aero box body
- Aerodynamic cab top deflector and
  side collars
- Tuckaway taillift

Canter 7C15 HEV Box

Key Features:
- 3850mm wheelbase
- Diesel/Electric Hybrid system with kinetic energy recovery system
- Hybrid display with state of charge indicator and energy-flow display
- Engine Start/Stop System
- Manual air conditioning
Bodywork:
- Box body

Canter 7C15 HEV Fridge

Key Features:
- 3400mm wheelbase
- Diesel/Electric Hybrid system with kinetic energy recovery system
- Hybrid display with state of charge indicator and energy-flow display
- Engine Start/Stop System
- 24v voltage transfer for body builder     applications
Bodywork:
- Refrigerated body
- Aerodynamic cab top deflector and
  side collars
- Rear door entry with fold down step

Canter 7C18 Box

Key Features:
- 4750mm wheelbase
- 6-speed Duonic automated gearbox with     dual clutch
Bodywork:
- Box body
- Aerodynamic cab top deflector and
  side collars
- Tuckaway tail lift                                                                                      

Canter 7C18 Curtainside- At Intercounty

Key Features:
- 4750mm wheelbase
- 6-speed Duonic automated gearbox
  with dual clutch
Bodywork:
- Curtainside body
- Aerodynamic cab top deflector and
  side collars
- Tuckaway tail lift                                                                           

Canter 7C18 Factory Tipper Body

Key Features:
- 3400mm wheelbase
- 3760kg payload
- 6-speed Duonic automated gearbox with
  dual clutch
- Automatic Climate Control
Bodywork:
- Scattolini rear tipper with steel side walls, robust, puncture-proof steel floor,
tipping angle 43° Additional features
& non-factory equipment
- Protective Tail Lamp grills
- Plastic Tool Box

                                         

Canter 7C15 HEV Municipal Tipper

Key Features:
- 3400mm wheelbase
- Diesel/Electric Hybrid system with kinetic energy recovery system
- Hybrid display with state of charge indicator and energy-flow display
- Engine Start/Stop System
Bodywork:
- Brit-Tipp steel tipping body with mesh cage and LED beacons
- D’Hollandia 1000kg Tail lift
- Remote control unit for tipping equipment
- Sentinel cycle detection system with LED cycle sign
- Sentinel “Reverse with Safety” 4 camera system, including 7” colour monitor and
1TB hard drive recording unit


Contact our Truck Sales Team for more information.