FUSO Canter 3C13 Manual Tipper with Toolbox

*

FUSO Canter 3C13 Manual Tipper with toolbox for only £26,500+VAT!

Vehicle Specification:

Make of Vehicle:                       Mitsubishi                                

GVW:                                       3.5t

Model:                                      Canter 3C13

Year:                                        New    

Number of Axles:                     2                                                         

Cab Type:                                 Day        

Wheelbase:                              3400mm

Front Axle:                               Spring         

Rear Axle:                                Spring                         

 

Body Type:                               Alloy Dropside Tipper with Behind Cab Toolbox

 

Length:                                    3200mm (External)

Depth:                                      400mm       

Width:                                      1980mm

Base:

Complete alloy pressed and welded base.

Crossbearers out-rigged from the long runner sections to keep the floor height as low as possible @ approx. 400mm centres.

 

Floor:

Fully pressed and welded 4mm alloy floor, also to be pressed to form the side raves.

 

Front Frame:

Alloy constructed headboard with sheet infill up to window with mesh infill up to cab height.

Timber load strip.

 

Dropsides:

400mm high detachable dropsides made from 4mm alloy, Priden special formed heavy-duty pan style construction, retained by anti-luce fasteners and detachable rear posts.

 

Tail Door:

400mm high detachable alloy tail door, Priden special formed heavy-duty pan style construction.

Double swung with top hinges 100mm above.

 

Tipping Gear:

Under floor tipping gear complete with electro hydraulic power pack. Galvanised steel constructed tipping sub-frame fitted to the chassis and cab controls.  

 

Load Restraints:

Rope hooks will be fitted to all crossbearers where possible and to the front and rear of the body.

 

Ancillary Equipment:

Pressed and welded alloy wings

Standard mud flaps

Access step fitted nearside

(All the above to suit all legal requirements.)

 

Paintwork:

Sub-frame galvanised.

Body left natural finish.

 

Toolbox:  

630mm long behind cab alloy toolbox. Mounted behind the cab finishing level with the cab roof.

Fitted with side opening doors, vectors locks and 3 off pockets.               

 

Towbar:

3.5t Dixon Bate ball and jaw towbar with standard electrics

 

For more information please contact our dedicated FUSO Sales Team.